|
| |
Product Classification : Can Making
|
|
CND-TRK-300 Oven Temperature Logger
|
|
The CanNeed CND-TRK-300 Oven Temperature Trackeris a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples."CND-TRK-300 Oven Temperature Tracker" is use to pass through the oven with the solidifying products, and record down the real temperature during the process.
|
|
|
CLT-600 Leak Tester for Can
|
|
The canneed CLT-600 Leak Tester for can is used for checking the permeability of 3-piece cans in a water bath.
The can is fixed to magnet disc plate and submerged into the water.
At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible.
A special parallel clamping system enables to measure different diameters and heights with one device.
The clamping pressure and the test pressure may be set independantly.The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water.
The whole test cycle is automated and is pneumatically controlled by pressure regulator valves.
|
|
|
CLT-100 Leak Tester for Can
|
The Canneed "CLT-100 Leak Tester for can" is used for checking the leakage of 3-piece cans in a water bath. It can test one can in each test.
The test procedure is performed semi-automatically and the CLT-100 is suitable for different sizes of round 3-piece cans.
|
|
|
IDG-100 Can Internal Diameter Gauge
|
IDG-100, IDG-200 & IDG-300 Can Internal Diameter Gauge
This unit serves for quickly checking the Internal Diameter of can. It is supply with a calibration piece.
IDG-100 is for small diameter cans, Cans dia. 52-100 mm (only measure one type can)
IDG-200 is for large diameter cans, Cans dia. :80-260 mm (only measure one type can)
IDG-300 is compatible for two (2) or three (3) sizes of cans.
|
|
|
ZM-370-D, ZM-570-D, ZM-920-D, ZM-1220-D Digital Body Blank Gauge
|
The Canneed ZM-370-D, ZM-570-D, ZM-920-D, ZM-1220-D Digital Body Blank Gauge
These units are made for the quality control of can body blanks.
1. Precision gauge for measurement of body blanks with the help of a incremental ruler/ fine measuring gauge combination and a digital dial indicator for the angle measurement;
2. Constant measuring force for accurate, repeatable, user-independent results
3. Sequential measurement of blank height, blank width and squareness
|
|
|
ZM-10 Digital Body Blank Gauge
|
|
The CanNeed ¡°ZM-10 Digital Body Blank Gauge¡± is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement.
|
|
|
PTG-100 Plate Thickness Gauge
|
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. Equipped with the Mitutoyo 0.001mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
CDG-100 Curl Diameter Gauge
|
The CanNeed "CDG-100 Curl Diameter Gauge" is a Digital gauges for measuring Curl Diameter of ends. Equipped with calibration piece. With the Mitutoyo 0.01mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
WOM 4C Welding Overlap Monitor
|
|
The CanNeed ¡°WOM 3A Welding Overlap Monitor¡± is used to measure the length and thickness of side seam welding overlap. It¡¯s equipped with the most advanced optical system and Golden LensTM, which ensured the high image definition.
|
|
|
|
CDG-100 Curl Diameter Gauge
|
The CanNeed "CDG-100 Curl Diameter Gauge" is a Digital gauges for measuring Curl Diameter of ends. Equipped with calibration piece. With the Mitutoyo 0.01mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
|
WOM 4C Welding Overlap Monitor
|
|
The CanNeed ¡°WOM 3A Welding Overlap Monitor¡± is used to measure the length and thickness of side seam welding overlap. It¡¯s equipped with the most advanced optical system and Golden LensTM, which ensured the high image definition.
|
|
|
WWT-100 Welding Line Outstretched Tester
|
The CanNeed ¡°WWT-100 Welding line outstretched tester¡± is used to test the flange point welding integrality of 3-pieces cans.
|
|
|
WWP-100 Welding Seam Ball Press Tester
|
|
The Canneed "WWP-100 Welding Seam Ball Press Tester" is used to test the welding seam quality, including the welding seam strength and continuity of 3-piece cans.
|
|
|
WWT-100 welding line outstretched tester
|
|
The CanNeed "WWT-100 Welding line outstretched tester" is used to test the flange point welding integrality of 3-pieces cans.
|
|
|
BDD-200A Bead Depth Gauge (Digital)
|
The CanNeed "BDD-200A Bead Depth Gauge" is for measuring the bead depth of the can body, with the special designed end measuring holder, end bead depth can also be measured. The fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy.
BDD-200A Bead Depth Gauge is the advanced model compare to the BDD-200, it is consisting of measuring units, digital indicator and data processor, operators only need to move the measuring needle to pass the beads, then the data processor will auto calculate and display the value of bead depth. |
|
|
DHG-300 Digital Can Height Gauge
|
|
The CanNeed "DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
FWG-100-D, FWG-200-D, FWG-300-D Flange Width Gauge
|
|
The CanNeed ¡°FWG-100-D, FWG-200-D, FWG-300-D Flange Width Gauge¡± is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
|
|
|
AXL-10000 Axial Load Tester
|
|
The CanNeed ¡°AXL-10000 Axial Load Tester¡± measures the axial force resistance of food cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
|
|
|
VSM 6A Automatic Seam Monitor
|
The " VSM 6A Automatic Seam Monitor " is a compact measuring system
for quick and accurate automatic seam measurements and storing of seam images.
The seam length, body hook, end hook, actual overlap, percentage overlap;
seam gap, seam thickness and body hook butting% are measured.
The values can be stored in a Excel file and are displayed in on-screen if values are within specs.
Seam image can be printed, stored!
|
|
|
|
PTG-100 Digital Plate Thickness Gauge
|
The CanNeed PTG -100 Digital Plate Thickness Gauge
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. Equipped with the Mitutoyo 0.001mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
PDG-D Plane depth Gauge (Digital)
|
|
The CanNeed ¡°PDG-D Plane Depth Gauge for Canned Food and Beverage¡± is used to measure the plane depth of canned food and beverage. It can monitor the inner pressure or vacuum of the cans without piercing the cans.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
